Fluid Audio Fader Series F5 Studio Monitors – Pair, 5″ woofer

Click To Read Reviews

  • Frequency Response: 54 Hz – 22 kHz (+/-3dB), Crossover Frequency: 4.5 kHz
  • Input sensitivity: 85 mV pink noise input produces 85dBA output SPL @ one meter with volume control at maximum (97dB Max SPL) Power: Fixed 110V ~50/60 Hz or 220V~50/60 Hz
  • Protection: RF interference, output current limiting, over temperature, turn-on/off transient and subsonic filter
  • Size (Single Monitor): 256 x 174 x 193 mm (HxWxD) Weight (pair monitors): 9.5 lbs./4.3 kg
  • Signal-To-Noise: > 90 dB (typical A-weighted)
  • Polarity: Positive signal at + input produces outward LF one displacement
  • Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced
  • Amplifier Power: 2 x 20 watts (40W total)
  • Cabinet: Vinyl-laminated MDF

The F5 studio monitor is the model that started it all for Fluid Audio. When we decided to enter this market, we wanted to address many of the issues found with monitors at this price point. We didn’t realize that so many others would want the very same thing! While it is often referred to as a “budget” monitor, the F5 brings a lot of technology and value to the table. The amplifier rear panel has not only XLR and TRS inputs for more professional applications, we have also included an RCA input for more “consumer friendly” applications. The amplifier has a generous heat sink for long mixing sessions. Most monitors have their amp heat sinks inside the cabinet where all the heat is generated and cannot escape. The F5 amplifier ICs are mounted directly to the heat sink, so heat can transmit harmlessly away from the drivers and internal circuitry. The amp also has something no other monitor in it’s class can boast – A standby circuit that shuts down the amp after 20 mins of non use. This may not seem like much of a feature, but we are all concerned with being “green” and conserving energy in this day and age. This is our small contribution. The well reinforced MDF cabinet minimizes resonances, and the front mounted bass-reflex port allows the bass energy to radiate directly towards the listener. And unlike many other monitors in it’s class, there is a volume control on the front baffle for easy access. All of these features come together to create a great sounding yet transparent listening and mixing experience at a great price.

 


From the manufacturer

Specs

Specifications

    • Frequency response: 49 Hz – 22 kHz (+/-3dB)
    • Crossover frequency: 2.5 kHz
    • Low-frequency amplifier power: 40 watts
    • High-frequency amplifier power: 30 watts
    • Signal-to-noise: > 100 dB (typical A-weighted)
    • Polarity: Positive signal at + input produces outward LF one displacement
    • Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
    • Input sensitivity: 85 mV pink noise input produces 90dBA output SPL @ one meter with volume control at maximum (101dB Max SPL)
    • Power: 115V ~50/60 Hz or 230V~50/60 Hz user switchable
    • Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
    • Cabinet: Vinyl-laminated MDF
    • Size (single monitor): 10.25” x 6.9” x 7.7” / 260 x 176 x 195 mm
    • Weight (pair): 22 lbs / 10 kg

Reviews

There are no reviews yet.

Be the first to review “Fluid Audio Fader Series F5 Studio Monitors – Pair, 5″ woofer”

Your email address will not be published.


* All promotional media, images, logo are copyright, trademark and property of respective Brand / Manufacturer and / or Amazon. Specfications subject to change without notice, please verify specfications and details with seller / manufacturer / brand. In case of issues or to report incorrect content contact us here. We (buy.guru) are not liable for any discrepancy in above content. Some content above is our opinion only.