REL Acoustics T/9i Subwoofer, 10 inch Front-Firing Driver, Arrow wireless port
T/9i represents the most of T/i that we can deliver, and if sheer output alone is a primary requirement for your theater or music system then read no further. The combination of a lightweight, composite 10” driver coupled to a matching 10” T/i passive delivers speed, slam and attack when called upon but also is capable of tracing more delicate passages when necessary. Large in sonic scale, the T/9i is ideal for mating up with floor standing speakers and rooms that are on the medium-to-large size. Powerful, concussive, yet beautiful.
T/9i delivers more than just raw output. We started with our driver upgrades and built outward. The lovely cabinets grew by 4 lbs. (1.8 kg) over its predecessor due to thicker cabinet walls and improved bracing. Why? Because the additional speed and impact of the new drivers requires greater control or the benefits can be lost before they get to the listener.
The new composite alloy/fibre engine in T/9i blends precisely the correct dimension of stiffening alloy with a fibre material chosen for its sonic neutrality and light weight. The combination is brilliant; exceeding the performance of competitors’ drivers that are many times more expensive. The forward-firing 10” active couples with a 10” down-firing passive, again with carefully chosen balances of alloy to fibre and the result is seamless, effortlessly deep bass that blends perfectly with the main speakers.
Following on the heels of the acclaimed LongBow™ Wireless, Arrow delivers much of the promise and connectivity of hardwired RELs with the placement flexibility and pure cool factor of great wireless for all of T/i. For a reasonable sum, Arrow gives you the ability to place subs in distant corners, along glass walls, or on hardwood floors where a cable would otherwise destroy the effect.
Type Front-firing active driver, down-firing passive
Active Driver Size & Material
10 in., 250mm long-throw, FibreAlloy™ inverted aluminium dust cap, steel chassis, white cone
Passive Radiator Size & Material
10 in., 250mm long-throw, inverted aluminium dust cap, steel chassis, black cone
Low Frequency Extention
-6dB at 28 Hz
High Level Neutrik Speakon, Low Level single RCA, LFE RCA
300 watts (RMS)
Arrow (Optional), Zero Compression Single Large Scale Integrated Chip
Fully Electronic Set Safe
Mains Input Voltage
220-240 volts, 110-120 volts for certain markets
3.15 Amp semi delay 230 volts operation, 6.3 Amp semi delay 115 volts operation
W x H x D
13 x 15.2 x 16 in. (330 x 387 x 407 mm)
41.3 lbs. (18.7 kg)
High Gloss Black, High Gloss White, 5 coats
* All promotional media, images, logo are copyright, trademark and property of respective Brand / Manufacturer and / or Amazon. Specfications subject to change without notice, please verify specfications and details with seller / manufacturer / brand. In case of issues or to report incorrect content contact us here. We (buy.guru) are not liable for any discrepancy in above content. Some content above is our opinion only.