SVS PB2000 12″ 500-watt Powered Subwoofer

Click To Read Reviews

Features

For chest-thumping movie slam and impact and sheer low frequency performance for the price, the PB-2000 subwoofer destroys larger and more expensive subwoofers, dipping all the way down to 17Hz without sacrificing musicality or speed in transients. The subwoofer features a front-firing 4-inch high-flow port with inner/outer port flares and energizes rooms of all sizes with extreme low frequency output for jaw-droppingly powerful and realistic movie and music audio experiences.

At the heart of the SVS PB-2000 ported box subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and FEA-optimized motor for nearly distortion-free performance. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the subwoofers to their maximum output levels. To ensure the PB-2000 can withstand punishing output levels long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximize longevity.

The PB-2000 Subwoofer’s Sledge STA-500D DSP amplifier features specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at a robust 500 watts RMS continuous and 1,100+ watts peak dynamic, the amplifier has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don’t stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behavior at the drive limits of the subwoofer system.

With cabinet dimensions of 20.9 x 17.3 x 22 inch and weighing 66 lbs, the PB-2000 is nearly 40% larger and twice the weight of the SB-2000.

Specs

17-260 Hz +/- 3 dB
Expect 2-3 Hz deeper extension in small to mid-size rooms.

2-meter ground plane away from reflective structures (quasi-anechoic)

Subwoofer Specs:

Premium black ash finish.
Protective non-resonant steel mesh grille.
Front-firing 12″ driver.
Rear-mounted amplifier.
Screw-in rubber feet.
Robust Medium Density Fiberboard(MDF) cabinet construction.

Cabinet Dimensions: 20.9″ (H) x 17.3″ (W) x 23.2″ (D) (without grille).
Overall Dimensions: 20.9″ (H) x 17.3″ (W) x 25.4″ (D) (with grille).
Weight (unboxed): 65.6 pounds.
Shipped Dimensions: 30″ (H) x 23″ (W) x 27″ (D).
Shipped Weight: 82 pounds.

Driver Specs:

SVS 12” 2000-series driver.
Powder-coated cast aluminum basket.
Dual high-grade ferrite magnets.
Finite Element Analysis (FEA)-optimized motor structure.
Dual shorting rings reduce gap induction and lower distortion.
Extended pole piece improves heat sink and thermal management properties.

2” diameter, high-power voice coil.
Upgraded Nomex spider for improved linearity and driver control at extreme drive levels.
High-quality insulated tinsel leads with 3-point-contact precision alignment.
Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behavior.
Low-creep rubber long-throw surround for excellent durability and longevity.

Amplifier Specs:

Sledge STA-500D DSP amplifier.
500 watts RMS continuous (1100 watts peak dynamic).
Efficient and cool-running Class D topology.
DSP control for accurate response and refined behavior under all operating conditions.
Main power rocker switch.
Auto-On / On toggle switch.
3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input.
Green standby mode with > 0.5 watts consumption.

Stereo line-level RCA Input & Output connections.
Input impedance – 47 kΩ (unbalanced line-level RCA).
Continuously variable volume/gain control.
Continuously variable (0-180 degrees) phase control.
Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting.
Fixed 80 Hz 12 dB/octave high pass filter on line level outputs.
RoHS compliant, lead-free construction and world-wide safety certifications.
Detachable power cord.

Reviews

There are no reviews yet.

Be the first to review “SVS PB2000 12″ 500-watt Powered Subwoofer”

Your email address will not be published. Required fields are marked *


* All promotional media, images, logo are copyright, trademark and property of respective Brand / Manufacturer and / or Amazon. Specfications subject to change without notice, please verify specfications and details with seller / manufacturer / brand. In case of issues or to report incorrect content contact us here. We (buy.guru) are not liable for any discrepancy in above content. Some content above is our opinion only.