SVS SB2000 500W Powered Subwoofer 12″

Show All:
Show More: ,

Click To Read Reviews

The SVS SB-2000 achieves a staggering 19-240 Hz frequency response from a compact, sealed enclosure weighing only 35 lbs. and measuring roughly 15-inches all around. The subwoofer’s weight, compact footprint and understated but elegant appearance makes it easy to move and blend into any listening environment, without sacrificing any of the power and slam you’d expect from a massive subwoofer. No small performer, the SB-2000 beats the output levels of subwoofers twice its size and weight. An all-new driver and amplifier, sealed cabinet and revised tuning enable the SB-2000 to achieve levels of articulation, musicality, dynamics and fathomless extension unequaled in other compact powered subwoofers.

At the heart of the SVS SB-2000 subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and an FEA-optimized motor for distortion-free performance, even at the most extreme drive levels. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the driver to reference SPL playback levels. This ensures accurate frequency response with maximum impact. To ensure the SB-2000 can play its best long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximize longevity.

The SB-2000 Subwoofer’s Sledge STA-500D DSP amplifier boasts specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at 500 watts RMS and 1,100+ watts peak dynamic power, the amp also has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters along with volume, gain, and phase controls for fine-tuning performance. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behavior at the drive limits of the subwoofer system.

Specs

19-220 Hz +/- 3 dB
Expect 2-3 Hz deeper extension in small to mid-size rooms.

2-meter ground plane away from reflective structures (quasi-anechoic)
Roll-off slope optimized to take maximum advantage of available room gain

Subwoofer Specs:

Premium black ash and piano black finish options
Protective non-resonant steel mesh grille
Front-firing 12″ driver
Rear-mounted amplifier
Screw-in rubber feet
Robust Medium Density Fiberboard(MDF) cabinet construction

Cabinet Dimensions: 14.6″ (H) x 14.2″ (W) x 15.4″ (D) (without grille)
Overall Dimensions: 14.6″ (H) x 14.2″ (W) x 17.1″ (D) (with grille)
Weight (unboxed): 34.8 pounds
Shipped Dimensions: 21″ (H) x 20.2″ (W) x 23.2″ (D)
Shipped Weight: 51 pounds

Driver Specs:

SVS 12” 2000-series driver
Powder-coated cast aluminum basket
Dual high-grade ferrite magnets
Finite Element Analysis (FEA)-optimized motor structure
Dual shorting rings reduce gap induction and lower distortion
Extended pole piece improves heat sink and thermal management properties

2” diameter, high-power voice coil
Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
High-quality insulated tinsel leads with 3-point-contact precision alignment
Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behavior
Low-creep rubber long-throw surround for excellent durability and longevity

Amplifier Specs:

Sledge STA-500D DSP amplifier
500 watts RMS continuous (1100 watts peak dynamic)
Efficient and cool-running Class D topology
DSP control for accurate response and refined behavior under all operating conditions
Main power rocker switch
Auto-On / On toggle switch
3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input
Green standby mode with > 0.5 watts consumption

Stereo line-level RCA Input & Output connections
Input impedance – 47 kΩ (unbalanced line-level RCA)
Continuously variable volume/gain control
Continuously variable (0-180 degrees) phase control
Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting
Fixed 80 Hz 12 dB/octave high pass filter on line level outputs
RoHS compliant, lead-free construction and world-wide safety certifications
Detachable power cord

Reviews

There are no reviews yet.

Be the first to review “SVS SB2000 500W Powered Subwoofer 12″”

Your email address will not be published.


* All promotional media, images, logo are copyright, trademark and property of respective Brand / Manufacturer and / or Amazon. Specfications subject to change without notice, please verify specfications and details with seller / manufacturer / brand. In case of issues or to report incorrect content contact us here. We (buy.guru) are not liable for any discrepancy in above content. Some content above is our opinion only.